Delivery & Installation Guide

HOT TUB DELIVERY BASICS:

 

To prepare for the delivery of your hot tub, make sure the delivery path is clear and no obstructions are present. Obstacles such as overhanging tree limbs, awnings, protruding gas meters, water meters, and A/C units can prevent easy access. It may be necessary to remove a gate, part of a fence, or other items in order to move the spa to the desired location. If there are more than six consecutive stairs without a landing, you may be required to find another delivery path. Check the measurements on 90◦ turns to make sure the spa will fit through.

 

Most spas are moved using a dolly or slip sheet, but occasionally a crane is required to install the spa by lifting it to its final destination. This occurs when the spa has to be taken off of the dolly cart to go over a wall, either because the entry area is too narrow, the eaves are too low, the corner is too tight, or the stairway is too steep. The use of a crane is a common practice and is usually the easiest and safest method for moving a spa when access is difficult. The crane has a truck-mounted boom and can fit easily in your driveway. The Crane Operator will lift your spa over walls, buildings, or any other obstruction and place it as close to the installation site as possible.

 

The chart below can help you visualize possible obstacles to identify before your spa is delivered. Let your dealer know of any potential issues and they may want to come inspect your site before delivery.

A – Obstacles such as overhanging tree limbs, awnings, protruding gas meters, water meters, and A/C units can prevent easy access.

B – WARNING: Watch for power lines.

C – It may be necessary to remove a gate, part of a fence, or other items in order to dolly the spa to the desired location.

D – Check the measurements on 90◦ turns to make sure the spa will fit through.

E – If there are more than six consecutive stairs without a landing, you may be required to find another delivery path.

Depending on access to the spa site, your spa may be dollied in either horizontal or vertical position. 

 

NOTE: The height of the cart used to dolly your spa into position will need to be added to the height of your spa when calculating the total height clearance required to complete your delivery. Spa carts are typically around 6” (15.24cm) in height. (If necessary, see your authorized Bullfrog Spa dealer for the exact height.)

CONTACT US

9 + 10 =

Address

3535 W Broadway St #1, Missoula, MT 59808

Hours

M-F: 9:30am – 6:00pm
Sat:  10:30am – 6:00pm
Sun: Closed

Phone

406-251-1340

Email

contact@bullfrogspasmt.com

Spa Inquiry